聯系我們
濟南富強門業有限公司
聯系人：林經理
電話：151 6888 2846
郵箱：527800164@qq.com
地址：濟南市歷下區化纖廠路8號3號樓101號
快速卷簾門發生失控的原因有哪些？
來源：http://m.theoakgallery.com 日期：2020-08-24 發布人：
很多的工廠里面都會使用快速卷簾門，是因?yàn)檫@種工業門具備防盜的功能。但是這種快速門的開啟關閉非常的頻繁。以致于長時間的使用會出現一些問題，例如快速卷簾門的控制系統失效。
Many factories will use fast shutter doors, because this kind of industrial door has the function of anti-theft. But this kind of fast door opens and closes very frequently. As a result, there will be some problems in the long-term use, such as the failure of the control system of the fast rolling shutter door.
一般來說，長期使用快速卷簾門，發生控制失效的原因主要可能是下面的幾個：
Generally speaking, the main causes of control failure in the long-term use of fast shutter doors are as follows:
1、工業快速卷簾門的繼電器的接觸點出現粘死的情況，這時候我們需要更換繼電器。
1. The contact point of the relay of the industrial fast rolling shutter door is stuck. At this time, we need to replace the relay.
2、快速門的行程微動，開關失效或者是出片變形。如果是這樣的話，那就需要更換微動開關或觸片。
2. The travel of the fast door is inching, the switch fails or the plate is deformed. If so, it is necessary to replace the microswitch or contact pad.
3、快速卷簾門的靠板螺絲發生松動的情況，易導致靠板的移位。這種情況只是需要緊定滑塊螺釘并使靠板復位。
3. The screws of the back plate of the fast rolling shutter door are loose, which is easy to cause the displacement of the back plate. In this case, it is only necessary to tighten the slider screw and reset the backup plate.
4、工業快速卷簾門的滑塊或螺母不能隨絲桿轉動而移動。這個可能就是需要潤滑或者其他的解決方法了。
4. The slider or nut of the industrial fast shutter door cannot move with the rotation of the screw rod. This may be the need for lubrication or other solutions.
5、快速卷簾門的限位器傳動齒輪發生破損。發生這種情況的話，那么就需要進行更換限位器傳動齒輪。
5. The transmission gear of the limiter of the fast rolling shutter door is damaged. If this happens, then it is necessary to replace the drive gear of the limiter.
6、快速卷簾門的開啟關閉的上下鍵被卡死。這個簡單，按鈕壞了就更換按鈕就行了。
6. The up and down keys for opening and closing the quick shutter door are stuck. This is simple. If the button is broken, replace it.
閱讀/ Recommended reading
- 你知道濟南卷簾門是建筑與便捷的守護者嗎？ 2025-03-17
- 濟南卷簾門遙控器的配對方法 2025-02-25
- 車庫卷簾門彈簧問題的維修指南 2025-02-22
- 翻板車庫門和卷簾車庫門有什么不同 2025-02-11
- 剖析翻板車庫門和卷簾車庫門有什么不同點 2025-02-01
- 防火卷簾門的面積核算方式及裝置要求 2025-02-14
- 濟南卷簾門限位器壞了還能修理嗎？ 2025-02-03
- 每一扇卷簾門，都是品質與工藝的結晶 2025-01-27
濟南卷簾門維修指南
2025-03-25
常見故障解析Common fault analysis1、門體無法正常升降：這是卷簾門常見的問題之一。可能原因包括電機故障，比如電機過熱燒毀、內部零件磨損等；傳動系統出現問題，如...
