聯系我們

濟南富強門業有限公司
聯系人:林經理
電話:151 6888 2846
郵箱:527800164@qq.com
地址:濟南市歷下區化纖廠路8號3號樓101號
電動卷簾門的技術參數介紹
來源:http://m.theoakgallery.com 日期:2021-01-14 發布人:
1、 簾片:采用雙層鋼制防風聚氨酯簾片,簾片采用0.6mm+0.6mm厚雙層彩 鋼板,由專用軋制設備、濟南卷簾門高壓發泡機復合成型滾壓成形,耐腐蝕、不龜裂、不變色、強度高、抗腐蝕、抗風塵能力強.
1. Curtain: double layer steel windproof polyurethane curtain is used. The curtain is made of 0.6 mm + 0.6 mm thick double-layer high-quality color steel plate, which is compounded and rolled by special rolling equipment and Jinan rolling door high-pressure foaming machine. It is resistant to corrosion, cracking, discoloration, high strength, corrosion and wind dust
門板中間夾心層填充聚氨酯發泡材料,聚氨酯發泡密度為42±2公斤/立方米;具有一定的保溫功能;底部設有抗老化密封膠條,門體兩邊固定防串片封頭。
The polyurethane foam material is filled in the middle sandwich layer of the door panel, and the foaming density of polyurethane is 42 + 2 kg / cubic meter. It has certain heat preservation function; the bottom is equipped with anti-aging sealant strip, and the two sides of the door body are fixed with anti block film heads.

2、 卷門機:包含電機、支架板、特制底座、控制按鈕等。電機采用山東迪威爾 工業鏈條電機,噪音低,性能可靠,體積小,重量輕,安裝方便,可配遠距遙控操作,停電時手動操作方便,電機內部安置過熱保護器,溫度達到100℃時自動斷電,當溫度下降到70℃時(約經8分鐘會自動復原,可再次啟動使用)。
2. Door rolling machine: including motor, support plate, special base, control button, etc. The motor adopts Shandong Diweier industrial chain motor, with low noise, reliable performance, small volume, light weight and convenient installation. It can be equipped with remote control operation. It is convenient for manual operation when power failure occurs. An overheat protector is installed inside the motor. When the temperature reaches 100 ℃, the power will be cut off automatically. When the temperature drops to 70 ℃ (it will recover automatically after about 8 minutes and can be used again).
3、 軸管:大軸¢140(¢165)*1.5mm,焊接電機軸盤后,做防銹處理(表面刷 防銹漆)。
3. Shaft tube: large shaft ¢ 140 (¢ 165) * 1.5mm, after welding motor shaft plate, do antirust treatment (surface brush antirust paint).
4、 滑道:50*90*1.5鍍鋅或彩鋼導軌,表面靜電噴涂白色。
4. Slideway: 50 * 90 * 1.5 galvanized or color steel guide rail, surface electrostatic spraying white.
5、 骨架包箱:采用40×40×1.5鍍鋅方管和4#角鐵做骨架,外包0.5厚彩鋼板,預留活動維修口。
5. Skeleton box: 40 × 40 × 1.5 galvanized square tube and 4 ? angle iron are used as the skeleton, 0.5 thick color steel plate is wrapped, and movable maintenance opening is reserved.
下一篇:電動卷簾門和翻板門哪個適合用在車庫? 上一篇:電動卷簾門安裝要求需謹慎
閱讀/ Recommended reading
- 卷簾門出現問題該怎么辦? 2025-04-09
- 濟南卷簾門多樣的材質和類型劃分 2025-04-08
- 濟南卷簾門選材門道 2025-04-07
- 卷簾門怎么調節限位? 2025-04-02
- 濟南卷簾門如何選購? 2025-03-31
- 濟南卷簾門如何清潔和保養 2025-03-21
- 你知道濟南卷簾門行業發展趨勢嗎? 2025-03-20
- 濟南卷簾門廣泛的適用場景 2025-03-20
鋁合金卷簾門和鐵卷簾門有什么該選擇哪個?
2025-04-10
材質特性Material characteristics鋁合金卷簾門:鋁合金具有質輕的特點,其密度較小,便于安裝和操作,同時也減輕了門體對軌道和驅動裝置的壓力,延長使用壽命。而且鋁...